MK Smart TV Guard Voltage Power Protector Against Power Surges & Fluctuations All Smart TV

Buy MK TV Guard Voltage Protector and protect your LED/LCD TV and home entertainment system against all power fluctuations. It provides protection against high voltage disconnect 230V as well as against low voltage. It provides spike/surge protection and power back surge protection. It has microprocessor control. It provides lightning protection as well. Moreover, this voltage protector protects LED/LCD TV up to 65inch and your home entertainment system.

The MK TV Guard protects against high voltage, brown-outs, and voltage dips. These conditions are harmful to electrical and electronic equipment.

Low power (under-voltage) will certainly damage any appliance compressor. The TV Guard protects your appliance by disconnecting the power when it goes below unacceptable level. Additionally, there is a delay when power returns to normal. This will ensure that the appliance is not switched on-off repeatedly during fluctuations nor is it subjected to a massive surge normally experienced when power returns after power cuts.

Key Features:

• High Voltage disconnect & Low Voltage protection
• Microprocessor control
• Spike/surge protection
• Power back surge protection
• Lightning protection..
• Protects LED/LCD TV up to 65-inch & Home Entertainment System
• 6 Feet long cable for extra reach
• Heat resistant hard ABS plastic to withstand overheating
• Safety shuttered sockets
• Ideal for all electrical devices
• Ideal for both indoor & outdoor.

Feature:                          Technical Details:

Recommended              100 %

Model                            GUARD

Max Current                  13 Amps

Operating Voltage        $220\text{V}-240\text{V AC}$

Delay Period                30 Seconds – 1 Minute

Ideal Application        Smart TVs, LED Screens, DVD Players,                                        Home Theaters, Decoders

Socket Type                13A Universal Socket (Standard                                                    UK/Kenya 3-Pin)

OPERATING INSTRUCTIONS

Without doubt, power interruptions cause major problems for home and business computing, An unpredicable power supply can lead to worrying problems events such as surges, spikes, brownouts and utility, failures. If any of these should occur there 's a strong chance you will sufer from loss of critical data, lowered productvity and even damage to your expensive equipment.

PLEASE READ CAREFULLY

• The Fridge guard is an under voltage protection device rated a 13 AMPS. The Fridgeguard will disconnect if the mains goes below a pre-set limit and reconnect automatically only after the supply has returned to acceptable limits for the duration of the wait time.
• Make sure that your load does not exceed the rating of the Fridge guard which 13 AMPS. If exceeded, the TV guard may be damaged, and the warranty will be void
• Plug the Fridge guard into the mains and plug your appliance into the Fridge guard.
• Do not connect more than one appliance to the Fridge guard.
• On first switching on, the red LED will indicate and there will be no output while the Fridgeguard monitors the mains. if the mains level is acceptable, the yellow LED is litindicating that the Fridgeguard is in wait mode. At the end of the wait time and if the supply is above the lower limit the green LED goes on and the load is connected.
• It is recommended that the Fridge guard is kept switched on, and the appliance switched on and off as required, to prevent activating the time delay everytime the appliance is switched on.
• If the red LED shows, the incoming voltage is too low and the Fridge guard will switch off the power to protect your appliance. When the voltage returns to acceptable limits, the LED will go to yellow. activating the time delay. 30 secs later, the green LED go se on and normal power is connected to your appliance.